DIYers IT Zone

I just assembled my new AMD PC yesterday. So, i will share with u all how i DIY my own PC.

To assemble the PC is not a tough job, if follow the process correctly, it wouldn’t has any problem.

1. Prepare all necessary tools such as screw driver, cutter, and etc…

2. Unpack the motherboard and put it on top of spounge and box.

3. Lift up the CPU socket lever

4. Insert the processor according to the edge. ( It should be inserted smoothly… do not force in )

5. Close back the CPU socket lever to lock the processor.

6. Take out the CPU fan, make sure there is thermal grease on the heatsink.

7. Put the fan on top of the processor and locked it.

8. After that insert ram into motherboard DImms.

9. Take out casing back panel and replace with your motherboard back panel.

10. Insert the motherboard in the casing and lock it with screw.

11. Plug in all the connectors according to motherboard manual.

12. Insert graphic card into motherboard.

13. Insert optical drives, hardisk and connects it will motherboard and power supply.

14. Confirm all the connectors are plugged correctly, then we can proceed to power up the machine and install OS.

15. After finish installed OS and tested with no problem. switch off the machine, unplug power cable and tied up the connectors properly and closes the casing.

* during this process, user can take time to arrange the connectors and the drives properly to have a greater visual.

16. After that, power up again the machine and do some benchmark test of your machine and get some result on your system performace… hehe